On occasion, we all need to scan a document—an invoice, a recipe, instructions from a book—but far more people have an iPhone or iPad than a hardware scanner. Luckily, Apple has built a scanning capability into iOS, iPadOS, and macOS for some years now. The next time you’re faced with a piece of paper that you need in digital form, follow the instructions below.

Scan Directly with an iPhone or iPad

The little-known key to scanning with an iPhone or iPad is the Files app, which lets you scan one or more pages and save a PDF anywhere you like. Since it’s particularly easy to use iCloud Drive with Files, it’s a good way to create a file you can work with on your Mac later. (You can also scan into a note using the Notes app, but that’s mostly useful for storing information rather than creating files you can upload to the Web, send via email, or share in other ways.)

1. Open the Files app, tap Browse in the toolbar, and navigate to the folder where you want the scanned document to end up.
2. Tap the icon at the upper right and select Scan Documents.
   
3. The camera viewfinder appears. At the top of the screen, note the controls for the flash (the lightning bolt), the color filter, and the Auto/Manual toggle (below left). Immediately tap Auto to switch to Manual—we recommend using Manual until you’ve become fluid enough with the controls to let your device scan for you. You seldom need to change the flash setting, but you can force the flash on or off if you like. Similarly, the color filter option defaults to a color scan, but you can set it to grayscale or black-and-white if you want. It’s easier to make that change afterward.
   
4. Hold the iPhone steady so it can detect the edges of the paper. When it has, tap the round white shutter button to take a photo (above left). In Auto mode, it will just keep taking images for you, which is efficient with multiple pages but stressful if you aren’t ready.
5. Examine the scan to see if it looks good. You can drag the corners to adjust the selection to capture just paper, or if the image isn’t right, tap Retake for a do-over (above right). When you have it as you want it, tap Keep Scan.
6. If you want to scan additional pages, put them in the viewfinder and repeat Steps 4 and 5 (below left). Or, if you’re done, tap Save and jump directly to naming your file (below right).
   
7. If a page isn’t exactly the way you want it, tap the image well to the left of the shutter button to make changes. On the edit page, the crop icon at the bottom returns you to the previous screen to adjust the corners again. The color filter icon lets you choose from Color, Grayscale, Black & White, and Photo—stick with color or grayscale for most documents. If the document came in at the wrong orientation, tap the rotate icon. If the image still isn’t to your liking, you can retake it or tap the trash icon to delete it. If you’ve scanned multiple documents, you can swipe between them. Tap Done when you’re finished, and return to Step 6 to save.
   

Scan to Your Mac with Your iPhone or iPad

It’s easy enough to save a scanned document to iCloud Drive or another file sharing service so you can access it on the Mac or move it from the Files app to the Mac. But if your goal is to scan directly to the Mac, you can do that too.

In Preview, choose File > Import from iPhone > Scan Documents. (Preview will know about all your devices, so it will have sections for each device.) A dialog will appear on the Mac, and your device will immediately switch to the scanning interface.

Everything works just as it does if you initiated scanning from the device, including the Auto/Manual switch and the need to tap Save when you’re done. However, instead of saving the document to Files, it will appear as a new document in Preview, where you can work with it like any other PDF and save it to your drive.

Final Thoughts

There are two caveats to scanning documents using your iPhone or iPad:

• This approach to scanning does not do optical character recognition (OCR) to make the scanned text selectable—the resulting PDF pages are just images. Online tools can perform OCR on a PDF; we’ve seen good results from AvePDF’s OCR PDF tool. This might not be a good idea with sensitive documents.
• Scanned documents tend to be large. If your scan ends up too big to share via email, for instance, other online PDF compression tools can shrink files. If you use AvePDF to OCR your document, another click on its Hyper-Compress PDFs tool can compress the same document by as much as 90%.

Overall, you’ll probably get better quality from a hardware scanner—particularly a flatbed—because it’s easier to position the pages perfectly, the light is stronger and more even, and there’s no need to deskew (straighten) the scanned page images, as Apple’s software attempts to do when you’re not directly over the page. But it’s hard to beat the convenience of a quick scan with your iPhone when quality isn’t paramount.

(Featured image by Adam Engst)

Apple has long provided a microphone button in the keyboard to invoke dictation on the iPhone and iPad. But, it wasn’t always easy to hit, and you had to switch back to the keyboard to fix the inevitable mistakes. (Apple’s dictation is a huge timesaver but far from perfect, particularly with homonyms and proper nouns.) With iOS 16 and iPadOS 16, Apple made the microphone button larger and repositioned it to make it easier to tap. More importantly, the keyboard remains available while dictation is active, enabling you to work with text manually during dictation. You can fix mistakes, reposition the insertion point, select and delete text, and so on. For instance, if dictation inserts the wrong word, double-tap the word to select it and speak the replacement. Or, if you want to add something, tap in the text to move the insertion point and start speaking again. Dictation can even add punctuation for you, but it’s a little haphazard at that, so you might want to disable that option in Settings > General > Keyboard.

(Featured image by iStock.com/fizkes)

Everyone—or at least everyone reading this article—knows how to use a Web browser. But just because you can click links, search for websites, and type URLs doesn’t mean that you’re surfing the Web as smoothly and effectively as you could. We all have sites that we visit regularly—a local newspaper, perhaps, or a social media service that’s the only place to connect with far-flung family members. Plus, the rise of Web apps like Google Docs means that we may spend hours every day in a Web browser at a particular site.

Here then are six ways that you can make it easier to use the same sites every day. This list is far from comprehensive, but we hope it gets you thinking about how you can spend less time typing URLs and searching for sites. We’ll focus on Safari here, but similar features are available in most Web browsers.

Bookmarks

Many of you probably know about bookmarks, so let this serve as a nudge to remember how useful they can be. Dating from the earliest days of the Web browser, bookmarks are the original way to simplify revisiting a site.

In Safari on the Mac, save a bookmark by navigating to a page and then choosing Bookmarks > Add Bookmark. See your full list in the sidebar by choosing Bookmarks > Show Bookmarks. Click one in the list to load it. On an iPhone or iPad, tap the share icon and tap Add Bookmark; on the iPad, you can also drag a tab to the sidebar when it’s displaying bookmarks. You can see and visit your bookmarks by tapping the Bookmark icon in the toolbar (iPhone ) or the sidebar (iPad ).

Favorites

To make a particular bookmark even easier to access, add it to your Favorites. On the Mac, you can display the Favorites bar underneath the Location bar (View > Show Favorites Bar) and then click bookmarks for quick loading. Create a new favorite by putting a bookmark in the Favorites folder when you create it or by dragging it in later.

On the iPhone and iPad, favorites appear when you tap the Location bar, and adding a favorite is as simple as choosing Add Favorite instead of Add Bookmark in the share sheet.

As long as you have Safari enabled in your iCloud settings, your bookmarks and favorites sync among all your Apple devices.

Home Screen Icons

Want to go one step further? You can turn a Web page into a Home Screen icon on the iPhone or iPad. To set this up, just as with a bookmark, you navigate to the page and tap the share icon. Then select Add to Home Screen.

The Mac doesn’t have the same concept of Home Screen icons, but if you drag the URL for a Web page from the Location bar to your Mac’s Desktop, it will turn into a Web Internet Location file with a .webloc extension. It’s a normal file that you could put in the Dock, a Finder window’s toolbar, or anywhere else you want. Open it to load its page.

Bookmark Folders

Bookmarks and favorites are great for a site or two, but what if you want to open the same handful of sites every morning to get your daily dose of news and comics? Put all those sites in the same folder in the Favorites folder, either by adding them to the folder when you create them or by dragging them in afterward.

Once you have collected the desired bookmarks, you can open them all in new tabs by clicking the folder on the Favorites bar and choosing Open in New Tabs (or just Command-click it). If you don’t want it on your Favorites bar, the folder can live anywhere in your bookmarks—just Control-click it and choose Open in New Tabs.

This feature is available on the iPhone and iPad as well. Once the folder is in your Favorites, tap the Location bar and then touch and hold the folder. Choose Open in New Tabs from the menu that appears.

Tab Groups

Web browser makers were apparently unsatisfied with letting users open all the bookmarks in a folder in new tabs because they have come up with a similar feature called tab groups. Let’s say you’re researching new speakers to buy, and you want to compare options from different companies. Once you have open tabs for all the sites, you can open the sidebar in Safari on the Mac or iPad and use the Add Tab Group icon at the top to create and name a new tab group.

From then on, it appears in the sidebar, and when you select it, those tabs load automatically, replacing the ones that were there before (which are stored as another group). The feature is also available on the iPhone, where you must tap the tab icon in the toolbar first. Unlike a folder of bookmarks, when you close a tab in a tab group, it disappears, and if you want it back, you have to open it again manually.

Pinned Tabs

Perhaps you have several sites that are so important to you that you want them open at all times. For such situations, you can pin tabs to those sites. The utility of pinned tabs is that they stay in place even when you open a new window or quit and reopen Safari. Plus, if you click a link to a different website in a pinned tab, it opens in a new tab—pinned tabs always show the website you pinned. On the iPhone, where there’s no tab bar, pinned tabs live at the top of the tab screen. Each tab group can have its own pinned tabs.

To pin a tab in Safari on the Mac or iPad, drag an open tab all the way to the left in the tab bar until it shrinks into a tiny box showing only the site’s favicon. Or, on the Mac, Control-click the tab and choose Pin Tab (shown below). On the iPad, touch and hold the tab and select Pin Tab. To pin a tab on the iPhone, tap the tab icon first and then touch and hold a tab and select Pin Tab.

So there you have it! None of these features are particularly new, but they’re easily overlooked, and from what we’ve seen while watching people browse the Web, lots of people could benefit from them.

(Featured image by Adam Engst)

In early December, Apple made a surprise announcement: Advanced Data Protection for iCloud. It’s not as though iCloud’s standard data protection is problematic, but it hinges on one architectural decision that makes some iCloud data theoretically vulnerable: Apple holds the encryption keys necessary to decrypt iCloud data. Because Apple controls those encryption keys, an attacker or rogue Apple employee who could gain access to them could theoretically steal iCloud data. (There are many more safeguards; it’s not like there’s a big printout of keys anywhere.) Plus, since Apple has the technical capability to read that data, law enforcement agencies could legally compel Apple to hand it over.

Not all iCloud data is vulnerable in this way. Of the 26 types of iCloud data, 14 already support end-to-end encryption, where you control the encryption keys. That’s true of Health data, Passwords and Keychain, Apple Card transactions, and so on. You may not realize you’re managing these keys because Apple has baked that into the security architecture of its overall ecosystem. Apple hadn’t previously extended end-to-end encryption to more iCloud data types because doing so prevents Apple’s support engineers from recovering accounts for users who forget their passwords. Even when Apple can recover an account, the end-to-end encrypted data isn’t included.

So that’s the tradeoff. Advanced Data Protection increases security by extending end-to-end encryption to 9 of the remaining 12 iCloud data types. Those include iCloud Backup, iCloud Drive, Photos, Notes, Reminders, Safari Bookmarks, Siri Shortcuts, Voice Memos, and Wallet passes. But if you turn on Advanced Data Protection and forget your password, Apple won’t be able to help you recover your data.

Apple isn’t being cavalier about this risk. When you enable Advanced Data Protection, you must set up an alternate recovery method, preferably two. The simplest is a printed recovery key that you should store with other important papers, perhaps in a safe deposit box, and the other is an account recovery contact, a trusted person who can verify your identity and help you regain access to your account.

Nor is Advanced Data Protection a one-way street. If you ever decide the risk of forgetting your password is too great, you can always turn it off and fall back to iCloud’s standard data protection.

Several types of iCloud data remain under the standard iCloud protection even after you turn on Advanced Data Protection. For iCloud Mail, Contacts, and Calendars, the need to interoperate with external email, contacts, and calendar systems requires that Apple manage the encryption keys. Similarly, the collaboration capabilities of Pages, Numbers, and Keynote and the Shared Albums feature of Photos don’t support Advanced Data Protection. Also, although Advanced Data Protection can protect shared notes, reminders, and iCloud Drive folders, plus iCloud Shared Photo Library, that’s true only if everyone involved in sharing has Advanced Data Protection turned on. If not, the shared content falls back to standard iCloud protection.

There are also two notable downsides to turning on Advanced Data Protection:

• System requirements: All devices signed in with your Apple ID must be updated to at least iOS 16.2, iPadOS 16.2, macOS 13.1, tvOS 16.2, watchOS 9.2, or the latest version of iCloud for Windows. As a result, you’ll have to sign out of iCloud on any device too old to upgrade to the necessary operating system version. That may be a deal-breaker for some people. You must also have two-factor authentication enabled for your Apple ID and a password or passcode set on your devices, but everyone should already have done that, regardless of Advanced Data Protection.
• iCloud.com Web access: Turning on Advanced Data Protection automatically disables Web access to data at iCloud.com. You can re-enable Web access, but every subsequent visit to iCloud.com requires authorization from a trusted device, and the connection only lasts for an hour. If you make heavy use of iCloud.com, Advanced Data Protection may be burdensome.

So, should you use Advanced Data Protection? As long as all your devices support it, you’re not perturbed about the repeated iCloud.com authorizations, and you’re capable of maintaining both account recovery methods, go ahead. Although the benefit to most people isn’t huge—Apple’s security is excellent, and most people won’t be targeted by law enforcement—the downside is minimal as long as you understand the risk of Apple not being able to recover your account.

To enable the feature, navigate to Settings > Your Name > iCloud > Advanced Data Protection, tap Turn On Advanced Data Protection, and follow the prompts. Remember that you’ll need to set up the Account Recovery options before turning on Advanced Data Protection, and you may need to remove older devices from your iCloud account.

(Featured image by iStock.com/TU IS)

In iOS 16, Apple tightened security by displaying a confirmation alert when you copy data from one app and paste it into another. More security isn’t bad, but these alerts can become annoying if you copy and paste frequently. In iOS 16.1, Apple added a setting to control the behavior for each app. If you get these alerts too often when pasting in an app, go to Settings > AppName > Paste from Other Apps and switch it from Ask to Allow. Many apps don’t include the setting; hopefully, any apps where you paste often will have this setting or include it soon.

(Featured image based on an original by iStock.com/AaronAmat)

Whatever consumer electronics product you can name, there’s probably a “smart” version that you configure via an app or Internet-connected interface once you’ve connected it to your Wi-Fi network. For ease of setup and to keep costs down, many such devices come pre-configured with not just a default username and password, but the same default username and password as all other units. That’s bad enough, but worse, most people never change those defaults, which is just asking hackers and malicious bots to break in and take over. This risk is real—it has happened to security cameras, baby monitors, light bulbs, DVRs, toasters, refrigerators, and even fish tanks. So, if you received any so-called “Internet of Things” devices for the holidays—or have one or more already installed on your home network—immediately change the usernames (if possible) and passwords to something more secure. Store the new usernames and passwords in your password manager for future reference.

(Featured image by iStock.com/EvgeniyShkolenko)

Every year at its Worldwide Developer Conference in June, Apple previews planned features in the upcoming versions of macOS, iOS, iPadOS, watchOS, and tvOS. However, not all of those features are necessarily ready for the initial releases of those operating systems. In part, that’s because iOS must ship in sync with the latest iPhone models that Apple releases in September, whereas iPadOS and macOS often come out later. Even then, some of Apple’s promised features may not be ready for public consumption until the .1 or .2 updates.

Just before the holidays, Apple released a full set of updates, including iOS 16.2, iPadOS 16.2, macOS 13.1 Ventura, watchOS 9.2, and tvOS 16.2. Between those updates and the ones immediately preceding them, Apple has now delivered on all of its 2022 promises.

Here is a rundown of what’s now possible. Some features are specific to one of Apple’s operating systems; others cut across several and may work only on updated devices or even require that all your devices be upgraded:

• iCloud Shared Photo Library: Starting in iOS 16.1, iPadOS 16.1, and macOS 13.0, you can create another photo library and share it with family and close friends. It’s a great way to create a single shared space for photos and videos, but note that everything you contribute moves out of your Personal Library and into the Shared Library. Plus, everyone with whom you’re sharing has equal permissions to add, edit, and delete content in the Shared Library. The person who creates the Shared Library must have space in iCloud for it; it doesn’t count against anyone else’s iCloud storage.
  
• Live Activities: With iOS 16.1, Apple also unveiled Live Activities, a new type of dynamic notification that can appear on the iPhone’s Lock Screen or the iPhone 14 Pro’s Dynamic Island. Live Activities allow apps to display data like live sports scores (from the TV app), active weather (in CARROT Weather, below), flight tracking (in Flighty), and more.
  
• Freeform: The most notable addition in iOS 16.2, iPadOS 16.2, and macOS 13.1 was Freeform, Apple’s digital whiteboard app designed for collaborative brainstorming. It enables users to lay out a wide variety of content on a flexible canvas without worrying about fixed layouts or restrictive page sizes. Boards can contain text, hand-drawn graphics, sticky notes, shapes, and attachments—nearly any file on your Mac, iPad, or iPhone. Data syncs to your other devices through iCloud, and you can invite others (who must also be running a supported operating system) to collaborate on a board in real time.
  
• New Home architecture: Apple promised that the new Home architecture would be more reliable and efficient, although it’s not clear what that means. It does require an explicit upgrade, and once upgraded, devices that aren’t running the latest versions of iOS, iPadOS, macOS, watchOS, tvOS, and HomePod Software won’t be able to access the home. Apple has temporarily removed the option to upgrade after problems were reported, so perhaps wait until the company restores the upgrade and others have had a chance to test it.
• Stage Manager on external displays: The feature that initially caused iPadOS 16 to be delayed was Stage Manager, Apple’s new windowing paradigm for the iPad and the Mac. However, even when it first shipped in iPadOS 16.1, Stage Manager didn’t support external displays on the iPad. With iPadOS 16.2, you can finally have four apps in Stage Manager on the iPad display and another four on an external display. However, using Stage Manager on an external display requires an M1 iPad, which means the fifth-generation iPad Air, the third-generation 11-inch iPad Pro and later, and the fifth-generation 12.9-inch iPad Pro and later.
• Race Route and automatic track detection: In watchOS 9.2, the new Race Route feature gives you the option of racing your last or best time on any route you’ve run or biked at least twice. Plus, if you start an Outdoor Run workout while at a track, you’re prompted to begin a Track workout that optionally provides track-specific metrics like lap time and pace.
• Advanced Data Protection: In a surprise announcement in December, Apple unveiled Advanced Data Protection for iCloud, which extends end-to-end encryption to many more types of data in iCloud. For those concerned about breaches of Apple’s security or overreach by law enforcement, Advanced Data Protection is a very good thing. The downside is that when the feature is enabled, Apple cannot recover your data if you forget your iCloud password. For most people, the standard iCloud data protection remains sufficient. If you want to upgrade, note that all devices that you want to connect to your iCloud account must be running the latest operating system versions, which may not be possible for some otherwise fully functional older devices.
• Apple Music Sing: If you’ve been hankering to sing along with your favorite songs, Apple Music Sing is essentially karaoke for Apple Music subscribers on the iPhone, iPad, and third-generation Apple TV. Alcohol not included.

Between these new features and some important security updates, we strongly encourage anyone running iOS 16, iPadOS 16, watchOS 9, and tvOS 16 to update to iOS 16.2, iPadOS 16.2, watchOS 9.2, and tvOS 16.2. And if you’re still running an earlier version of one of those operating systems, you can upgrade to the latest at any time—they’re fine.

Similarly, if you’re already running macOS 13 Ventura—perhaps on a newly purchased Mac— you should update to version 13.1 to take advantage of security fixes. However, if you haven’t yet upgraded from macOS 12 Monterey, perhaps wait a little longer. There has been only one macOS update with bug fixes since the initial release of Ventura, so it feels as though another bug fix update might arrive soon, after which we may recommend general upgrades.

(Featured image based on original by iStock.com/champpixs)

Photos has long provided a hidden album you could use to hold images you wanted to keep a little more private. Until this year, however, it was security through obscurity: anyone who knew to reveal the album in Settings > Photos on an iPhone or iPad or by choosing View > Show Hidden Album on the Mac could see its contents. Now you can protect it—and the Recently Deleted album—with Face ID or Touch ID on an iPhone or iPad, or Touch ID or your password on a Mac. You can enable this feature in iOS 16 or iPadOS 16 using Settings > Photos > Use Face ID/Touch ID; in macOS 13 Ventura, choose Photos > Settings > General and select “Use Touch ID or password.” From then on, opening those albums will require authentication.

(Featured image by iStock.com/Kenishirotie)

With a handful of press releases buttressed by a 19-minute video, Apple pulled back the curtains on its new M2 Pro and M2 Max chips and announced updated Mac mini and MacBook Pro models that rely on the new chips. There are no significant design or feature changes with these updated models, just faster performance, enhanced external display support, and support for the latest wireless connectivity standards. The new Mac mini and MacBook Pro models are available to order now, with units in stores and orders starting to arrive on January 24th.

Then, in another surprise announcement, Apple announced the second-generation HomePod, which updates the full-size smart speaker with a few new features and likely makes it more cost-effective to produce.

New M2 Mac mini and M2 Pro Mac Broaden the Appeal

For many years, the Mac mini has been popular for its small size, low price, and decent performance, bolstered in 2020 by a move from Intel CPUs to Apple’s M1 chip. Apple has now increased the Mac mini’s power even more by letting users choose between the M2 and the new M2 Pro. How much more? It depends greatly on what you’re doing, and Apple offers some comparisons. The improvements will likely be noticeable with the M2 and obvious with the M2 Pro.

The M2 Mac mini starts at $599—$100 less than the starting price for the M1 Mac mini—and provides an 8-core CPU and 10-core GPU with unified memory configurations of 8 GB, 16 GB (add $200), or 24 GB ($400). In terms of storage, the base level is 256 GB, but you can increase that to 512 GB ($200), 1 TB ($400), or 2 TB ($800). It provides only two Thunderbolt 4 ports.

The M2 Pro Mac mini starts at $1299 for a 10-core CPU and 16-core GPU, but you can bump that up to an M2 Pro with a 12-core CPU and 19-core GPU for $300. You also get 16 GB of unified memory and 512 GB of storage for that base price. 32 GB of memory costs $400 more, and storage upgrades are 1 TB ($200), 2 TB ($600), 4 TB ($1200), and 8 TB ($2400). It offers more connectivity with four Thunderbolt 4 ports. Note that as you configure a powerful M2 Mac mini, you’ll be straying into Mac Studio territory in terms of both price and performance.

Both Mac mini models boast enhanced external display support. Read the tech specs for full details, but in essence, along with multiple monitor support over Thunderbolt, the HDMI port on an M2 Pro Mac mini supports either an 8K display or a 4K display running at a faster refresh rate, which might be a boon in video-focused fields. Other improvements that may be welcome in specific setups include the option to add 10 Gigabit Ethernet for $100, support for Wi-Fi 6E (which can improve throughput over short distances with a new router), and Bluetooth 5.3.

The updated Mac mini replaces both the M1 Mac mini and the Intel-based Mac mini that Apple had left in the lineup until now.

It probably won’t be long before Apple releases an M2 24-inch iMac, too. We know that some are pining for a 27-inch iMac with Apple silicon, and we’ll just have to wait to see if Apple returns to that form factor with either an iMac or iMac Pro. We can also expect M2 versions of the Mac Studio at some point, but we’ll have to wait for Apple to come out with an M2 Ultra chip if it’s to maintain the same lineup as today’s M1 family.

M2 Pro and M2 Max Speed Up 14-inch and 16-inch MacBook Pro

Since their October 2021 release, Apple’s professional laptops, the 14-inch MacBook Pro and 16-inch MacBook Pro, have provided impressive processing power thanks to their M1 Pro and M1 Max chips. Apple has now switched to the new M2 Pro and M2 Max chips, and the company says that both offer 20% more CPU performance, 30% more GPU performance, and 40% more Neural Engine performance than their predecessors. As with the Mac mini, the updated MacBook Pro models also feature enhanced external display support (see the tech specs for full details), Wi-Fi 6E, and Bluetooth 5.3. Finally, Apple estimates they’ll have an hour more battery life.

The 14-inch MacBook Pro starts at $1999 for an M2 Pro with a 10-core CPU and 16-core GPU, 16 GB of memory, and 512 GB of storage. Chip upgrades include the 12/19-core (CPU/GPU) M2 Pro ($300), the 12/30 M2 Max ($500), and the 12/38 M2 Max ($700). With memory, the M2 Pro configurations can upgrade to 32 GB ($400), whereas the M2 Max configurations start at 32 GB and let you go to 64 GB ($400) or 96 GB ($800, with the 12/38 M2 Max only).

The 16-inch MacBook Pro costs $2499 for an M2 Pro with a 12-core CPU and 19-core GPU, 16 GB of memory, and 512 GB of storage. Chip upgrades include the 12/30 M2 Max ($200) and the 12/38 M2 Max ($400). Memory is the same as with the 14-inch MacBook Pro, so the M2 Pro configuration can upgrade to 32 GB ($400), and the M2 Max configurations start at 32 GB and let you go to 64 GB ($400) or 96 GB ($800, with the 12/38 M2 Max only).

Given that these new MacBook Pro models provide more performance and battery life for the same prices as before, their release is entirely positive. If you were waiting for an M2 Pro or M2 Max laptop, now’s the time to place an order.

Apple Brings Back the Full-Size HomePod

Apple released the original HomePod in 2018, but even after dropping the price from $349 to $299, sales weren’t strong enough thanks to competition from much cheaper smart speakers from Amazon and Google. Apple discontinued the HomePod in 2021 and focused on the $99 HomePod mini. Now Apple has brought the full-size HomePod back, introducing a second-generation HomePod with a few extra features and the same $299 price. You can order it now in white or midnight, which replaces space gray, and it ships on February 3rd.

The new HomePod supports spatial audio with Dolby Atmos for music and video, which should enhance the listening experience. For those getting into home automation, it includes a sensor for temperature and humidity, and you’ll be able to use the Home app to create automations to control blinds, fans, and thermostats. It also supports the new Matter home automation standard. Finally, Apple says that a software update in a few months will add Sound Recognition, which will let the HomePod alert you if it hears smoke or carbon monoxide alarms. Wouldn’t you like to know if an alarm is going off while you’re away from home?

One note. You can use two HomePods to create a stereo pair, but both HomePods must be the same model. So you can’t pair an original HomePod with a second-generation HomePod or mix an HomePod mini with either one.

The main question, which we won’t be able to answer until the second-generation HomePod ships, is if it sounds as good as the original HomePod and hears Siri commands as well. That’s a question because Apple redesigned the HomePod’s audio hardware to use fewer tweeters and microphones. Plus, it relies on the S7 chip that powers the Apple Watch Series 7, as opposed to the A8 that first appeared in the iPhone 6. In short, it seems that Apple has worked to cut costs to enable the necessary profit margins. Given that Amazon’s hardware division reportedly lost $10 billion in 2022 by selling Echo smart speakers at cost, Apple’s move seems sensible, at least as long as it doesn’t hurt the HomePod user experience.

(Featured image by Apple)

We heard from a client that AutoFill in Safari suddenly stopped entering her name and address in Web forms when she chose Edit > AutoFill Form or pressed Command-Shift-A, forcing her to enter her contact information manually, like an animal. (And yes, the “Using information from my contacts” checkbox was selected in Safari’s AutoFill preferences.) Although we have no idea what caused the problem, the solution turned out to be simple. She went into Contacts, found her personal contact card, and chose Card > Make This My Card. Give this a try if you’re having trouble with AutoFill or haven’t yet started using it in Safari.

(Featured image by Adam Engst)